Building A Custom Single Seater Supercar Part 4

268 684 Näkymät

In todays episode its part 2 of the cage build out on the single seater supercar.
❱ Shop -
❱ Patreon -
❱ Facebook -
❱ Instagram -
❱ Twitch -
Fareoh - Cloud Ten

  • this project dead?

    rabbibabyrabbibabyPäivä sitten
  • is this build canceled? literally no updates for months!

    Apoorv BajpaiApoorv Bajpai2 päivää sitten
  • Any new news on this build?

    Shane GriffithShane Griffith5 päivää sitten
  • So what’s going on with this thing nothings been done to it in two months damn I liked this build was really looking forward to it

    Exploring With SethExploring With Seth5 päivää sitten
  • What happened to this build!???

    Meme-onardo DiCaprioMeme-onardo DiCaprio10 päivää sitten
  • What happened to this build ?

    RolandAshcroftRolandAshcroft10 päivää sitten
  • When are we going to see this completed?

    Jay DavisJay Davis11 päivää sitten
  • What happened to this series??

    JustAnother FNGJustAnother FNG11 päivää sitten
  • No sanctioning body or race track would let this thing run on it. I mean, the whole project is cool, but that main hoop is deficient in the extreme. Also, it would be easy to make that shape as one continous piece.

    Mr. QuindazziMr. Quindazzi14 päivää sitten
  • when is next episode coming out???

    aimbxtaimbxt16 päivää sitten
  • Patiently waiting for the next part 🤔

    tyran melancontyran melancon16 päivää sitten
  • I have a 93 corolla atm japan import, can i use USA drive shaft to replace my bad one? the import is right hand drive and USA is left. vin is AE100-003234 or AE100-AEHNK

    Jobe JosephJobe Joseph24 päivää sitten
  • Any update on this build?

    Ludwig KopparLudwig Koppar27 päivää sitten
  • do more on this car idk if your saving it for winter or what but i would love to see more and this beast going down the road

    Sean WilliamsSean Williams27 päivää sitten
  • Thats it?

    Shajeeb SadatShajeeb Sadat28 päivää sitten
  • wheres the next part?

    Amar ChahalAmar ChahalUukausi sitten
  • Where’s part 5?????

    drew baumdrew baumUukausi sitten
  • When are u making another video on the supercar

    David SearsDavid SearsUukausi sitten
  • What design program did you use?

    james mcinherneyjames mcinherneyUukausi sitten
  • Waitin to see the newer episodes like a 5 yo

    MÛŠÏÇ PlusMÛŠÏÇ PlusUukausi sitten
  • 1000th comment

    Kiefer van den BergKiefer van den BergUukausi sitten
  • Will this car be street legal?

    Redbullracing 2.0Redbullracing 2.0Uukausi sitten
  • Whens part 5??

    I MI MUukausi sitten
  • Whats going on with the single seater build its been a month since we seen the last vid

    Jason PartonJason PartonUukausi sitten
  • You should do something like this for the suspension

    Chris RiosChris RiosUukausi sitten
  • When are you going to put out another video on this super car

    David SearsDavid SearsUukausi sitten
  • You do not have a crumble zone in the front vehicle to absorb energy during a crash.

    J WJ WUukausi sitten
  • Any update on this?

    Colin FoleyColin Foley2 kuukautta sitten
  • This kinda looks like the new Delage D12 :)

    Erik GeeErik Gee2 kuukautta sitten
  • Inspiration!

    xcube salaxcube sala2 kuukautta sitten
  • Where’s part 5? It’s been over 3 weeks!

    drew baumdrew baum2 kuukautta sitten
  • Should have bought a chassis. That already is waaay too heavy with zero visibility

    Robert KennedyRobert Kennedy2 kuukautta sitten
  • Get Brent from PFI speed to do Dyno on your project burnt a con he’s a great guy as you will know . Do cal lab to re mote tune it over the web or i am sure you are bound to know someone cheers

    Paul TaylorPaul Taylor2 kuukautta sitten
  • What percentage of gross income goes to charity with Omaze?

    Tim GunnTim Gunn2 kuukautta sitten
  • This is bad ass, but I dare you to do a DeLorean build and then make it fast you'd get a lot more views from that than this, no one has done it properly everyone else just makes replicas or replicas of the hero car from BTF 1 or have a really short video where they just talk about it or talked about having it done. Everyone will love you for this if you accept. Do it

    Ramon NavarroRamon Navarro2 kuukautta sitten
  • Would it be difficult to make ground effect? That would be genuenly cool

    NoSnapNoSnap2 kuukautta sitten
  • When are we getting a fifth ep

    Zoe LodaiZoe Lodai2 kuukautta sitten
  • this is how an f1 team is born

    AxelAxel2 kuukautta sitten
  • ok i have a few questions 1. why is the wheelbase so long? secondly none of that looks safe

    iNVERT UKiNVERT UK2 kuukautta sitten
  • Cant sharper bends be done by relief cutting?

    EraPrestigeXEraPrestigeX2 kuukautta sitten
  • Man you'll got to shorten this thing cut and mend it please dear god

    derek grantderek grant2 kuukautta sitten
  • This thing is HUGE

    Wian NelWian Nel2 kuukautta sitten
  • To everyone saying that it will be to heavy there are a ton of power mods for the LS and you could easily get 600-700 reliably

    ZorzsZorzs2 kuukautta sitten
  • This is litterally a dream of mine to make it myself

    Pim PrijsPim Prijs2 kuukautta sitten
  • I love this. As for Post one ever said that the apocalypse couldn't be futuristic..maybe it's post-apocalyptic when we have been rebuilding...almost cyberpunk. I like it.

    john milliganjohn milligan2 kuukautta sitten
  • I really believe that you would benefit from a few chalk lines on the ground, and a plumb bob. Then you could check your work. Don’t get me wrong, and I love the build. However I really wish you would have bent that tube, but it’s your ride, so do you! Good luck!

    TR JohnsonTR Johnson2 kuukautta sitten
  • You may want to look into cross-body X-bracing on tubing, rather than those large square C tubes.

    Tylor MirandaTylor Miranda2 kuukautta sitten
  • hello when is the next vid out

    Conrad B HansenConrad B Hansen2 kuukautta sitten
  • ha ha .. this reminds me of the time i helped paint my brothers car with a paint roller.. this guy should stick to his office job and leave the mechanical stuff to those who are capable.. its all good though whatever floats your boat my friend \

    Mr EMr E2 kuukautta sitten

    Sathish KumarSathish Kumar2 kuukautta sitten
  • I'm not a professional so I have no complaints on your build

    DEATHSTROKEDEATHSTROKE2 kuukautta sitten
  • Please reinforce the bottom half a little more!

    Matt DuncanMatt Duncan2 kuukautta sitten
  • @B is for Build Chris, this has been said over and over in the comments. I dig your builds and concepts, but you lost me on this one. Seriously consider a little more research on cage design. All the dead end tubes, miter cut tubes for bends, and lack of triangulation is a huge safety concern. Also, grinding your welds is a no go. It may make it look better, but the weld needs to be completely intact. If you don't like the way it looks, you should practice a little more or let Oscar weld it out for you until you are confident in your ability. This build had the chance to be something amazing, but you are missing the mark on it now. Please take what a lot of people are telling you to heart. Normally, its usually just one or 2 haters in the bunch, but as you can tell we are concerned.

    brian allenbrian allen2 kuukautta sitten
  • Why is it so huuugggeee

    Katjuscha 4Katjuscha 42 kuukautta sitten
  • Your not going to be able to drive it anyhow. Because it's going to high side on every little bump. So safety is not a big deal. Should have put a little more thought into the wheelbase and ride height. But it's still going to get some looks at the shows.

    The Viper KingThe Viper King2 kuukautta sitten
  • What happened to the Lambo? Are you going to ever show it making some runs?

    11jpmarshall11jpmarshall2 kuukautta sitten
  • Make an Escudo Pikes Peak replica...

    Evl SC400Evl SC4002 kuukautta sitten
  • When is the next episode out ?

    Conrad B HansenConrad B Hansen2 kuukautta sitten
  • man why the so long wheel base ? push the rear wheel suspension a bit further to the center of the chassis and keep the engine/trans setup a bit more closer to the center of the chassis too . it is fine to have the engine close to the cockpit , AND PLEASE Buy a pipe bender instead of cutting alot of pipes and welding them together

    Hashem HHashem H2 kuukautta sitten
  • you need a structure for a rub board on the bottom like f1 uses just and idea for when you bottom it out

    IDtent33IDtent332 kuukautta sitten
  • Hey man what software did you use to design this car?

    VanTheManVanTheMan2 kuukautta sitten
    • Looks like Autodesk 3DS Max. More of a viz program than design.

      Mark PetersonMark Peterson9 päivää sitten
  • It is the innovators that create the new world. All you educated people that criticize this work that forward thinkers. Personally I cringe and hate and fear what they are doing - but what if this is the new thing - what if this is the new model? What if old theorist are actually dirty? Lets test it ??? really the removal of the structural integrity concerns me (And it does) But what if these guys are actually right??????? You educated people do not allow innovation - hence greatest-est Indian motorcycle. . . . . . ... .. ... What if they build the next best thing that makes the benchmarks? Then all your diplomas are reset - a new level of idiot is broken . . . . . Or you are right - let it be tested - not pretested on your old rules. . . . .. (KILLS INNOVATION! STUPID!)

    Owen OsborneOwen Osborne2 kuukautta sitten
  • We want next video

    Rajendra SuryawanshiRajendra Suryawanshi2 kuukautta sitten
  • Love from India

    Rajendra SuryawanshiRajendra Suryawanshi2 kuukautta sitten
  • Carrol Smith, Engineer To Win. That should be required reading. Read all of his books. I read them all in high school in the 80's.

    Beer_Gut_BoomerBeer_Gut_Boomer2 kuukautta sitten
  • Would love you to do an f1 inspired car

    iodin Monoxideiodin Monoxide2 kuukautta sitten
  • You do realize the 3 inch clearance is the final clearance after floor boards, body panels, etc. are installed, not the tubes.

    vmoutsopvmoutsop2 kuukautta sitten
  • #Truly

    Blinka BotBlinka Bot2 kuukautta sitten
  • Digitize the mirrors!

    FullyLoadedPatertosFullyLoadedPatertos2 kuukautta sitten
  • Everyone agrees that this build is very very scuffed.

    고등 지능 ODINS trash고등 지능 ODINS trash2 kuukautta sitten
  • Possibly maybe an engineer can look at this? Just to make sure to give you some points on what joints will be experiencing a lot of pressure and weight. Idk mannn but the last thing I wanna see Is a b is for broken

    KhoolhwhipKhoolhwhip3 kuukautta sitten
  • I love what you do Chris but this car is getting more and more cringey everytime we see it. None of us want to see you die so redesign and rebuild the cage with bends not bits.

    Jeff SchmittJeff Schmitt3 kuukautta sitten
  • Thought about Electric Steering? "Steer by Wire" No steering shaft to the front!

    Jaz BuhJaz Buh3 kuukautta sitten
  • How long is the car? I’m imagining it like an old school Lincoln Continental

    Chris PaulinChris Paulin3 kuukautta sitten
  • Way to long shorten this car. show more on stang. good backing music.

    Brian DaleBrian Dale3 kuukautta sitten
  • still faster than a ferrari sf1000

    James Studio AnimationJames Studio Animation3 kuukautta sitten
  • So basically a Walmart brand f1 car? Interesting.

    MizuxoMizuxo3 kuukautta sitten
  • Please tell me that chassis and cage isn’t mild steel

    Jacob WilliamsonJacob Williamson3 kuukautta sitten
    • Miters are stronger then bends if you put a plate between the cuts and then weld all 3 pieces together

      Jacob WilliamsonJacob Williamson3 kuukautta sitten
  • He’s basically just building a overdone sand rail so far

    WetNikeSocksWetNikeSocks3 kuukautta sitten
  • on the newer corvettes they use a tork tube and transaxle you should use that and you could make the drive train shorter

    DractussDractuss3 kuukautta sitten
  • 20ft wheelbase...

    JK F1JK F13 kuukautta sitten
  • you should put gussets in all the corners and put a hole in them with the dimple dye it would look cool and be more sound

    DractussDractuss3 kuukautta sitten
  • Did you dump the boat project?

    Scott the Tool EnthusiastScott the Tool Enthusiast3 kuukautta sitten
  • I AM sO DUNK WiTh tHw "HERE aNd HEre"dRInKinG GAMe!

    Jim DJim D3 kuukautta sitten
  • This thing is just ridiculous. Good luck trying to corner in this ocean liner.

    Hooha888Hooha8883 kuukautta sitten
  • Build it, Show it, Park it.

    Ordinary GuyOrdinary Guy3 kuukautta sitten
  • why is it so long ? like a lorry its going to weight tons just the from the size of it. be slow as fuck

    shift breakshift break3 kuukautta sitten
  • Since you have made a detailed model, it would not take much more time and effort to do a some basic mechanical simulations. If you are using Fusion 360, you should be able to import this into Ansys Workbench. Ansys Workbench does a lot of the hard work for you and there are plenty of tutorials.

    lampertllampertl3 kuukautta sitten
  • The placement of the tubing makes me wonder how youre going to get in and out of this thing

    KevKev3 kuukautta sitten
  • Ngl I love the intro straight into the stuff we came to see

    Dennis KlyDennis Kly3 kuukautta sitten
  • What cad software are you using B Is For Build

    Gabriel DombachGabriel Dombach3 kuukautta sitten
  • Nice...👍👍

    Arrian artArrian art3 kuukautta sitten
  • man thhis is a sick build but i would be clusterfucked in there

    Cnoevo Auto AdventuresCnoevo Auto Adventures3 kuukautta sitten
  • Hey Chris. What software did you use to design the car

    Dejan KrajaDejan Kraja3 kuukautta sitten
  • Am I the only one worried by his welds?

    FiiishoFiiisho3 kuukautta sitten
  • Each of these welds is just a stress cracking point... This "cage" that you've made out of a bunch different pieces should be single poles that are bent (most of them), use the tools you have ffs...

    FiiishoFiiisho3 kuukautta sitten
  • Ive never been so excited about a build

    Car Lover PhotographyCar Lover Photography3 kuukautta sitten
  • Should make the pedal box adjustable for this, it would make the car more comfortable in the long run to have some adjustments there when you need them. Just a thought

    Pro DougPro Doug3 kuukautta sitten
  • How is this being shifted again?

    Ethan SimonEthan Simon3 kuukautta sitten
  • May can enter this into a go cart race . Should win 😂 kinda wish it would have been more practical tho. Strictly a race car. Love the fact tho its getting built from scratch

    Mikel LandrumMikel Landrum3 kuukautta sitten