Got my Salvaged Raptor All Fixed Up!

662 632 Näkymät

In today's episode we're finishing repairs on the Roush supercharged Ford Raptor!
Thanks to SeatGeek! Download the app and enter code BUILD for $20 off your first purchase! (restrictions apply)
❱ Shop -
❱ Game -
❱ Patreon -
❱ Facebook -
❱ Instagram -
❱ Twitch -
Fareoh - Cloud Ten

  • Great fixer upper! Looks good.

    Brad JonesBrad Jones11 päivää sitten
  • These people are dangerouus. Lets hope their 'builds' will fail MOT tests.

    Henrik ScheelHenrik ScheelUukausi sitten
  • Can someone link me to where I can get a oem hood, grill, front bumper with lower plate..? Pretty much the whole front end ! Please and thank you

    El Compa GEl Compa GUukausi sitten
  • What will happen if you have a bent rod? Not a mechanic here.

    Mark CandelarioMark Candelario5 kuukautta sitten
  • When you weld it metall loose its strength and quality. Now its weaker than it was from factory man. It will be better if you modeling this element and mount it to frame with bolts. Or just install new front part of frame just like Wester talking when he is fixing his ford raptor. I m not a professional at welding but I used to fix russian car with frames))

    Kuanysh JakuelKuanysh Jakuel5 kuukautta sitten
  • straight? what about toe-in?

    Billy PendletonBilly Pendleton6 kuukautta sitten
  • I'm just a enthusiast not a mechanic, but wouldnt it make more sense to just buy new bumper and parts to repair truck back to its original look? If I was going to spend the money to paint the truck then i would go ahead spend the money to do the rest of it right .. just my opinion.

    Chris IngramChris Ingram6 kuukautta sitten
  • I feel bad for who ever bought this truck , that’s some straight Mikey mouse Job ..

    re1600rere1600re6 kuukautta sitten
  • Isn't the steering rack bent, where it connects to the tie rod end?

    vaderracingvaderracing7 kuukautta sitten
  • This comment section is Funny AF!!!!!! I've never seen the words"Bent tie rod" in my entire life!!! Lmmfao

    Shawn BakerShawn Baker7 kuukautta sitten
  • Is thers proof of these sick seats.... i thought so.

    Brad pattersonBrad patterson8 kuukautta sitten
  • You can also make a mark with a paint pencil in the center of the tire, measure the distance between the marks then rotate marks to the rear and remeasure, then start the adjustment so you have the same measurement front and rear

    David FarleyDavid Farley9 kuukautta sitten
  • the inner tie rod is bent

    Justin DuplainJustin Duplain9 kuukautta sitten
  • How much did you pay for the truck

    MMEZA MezaMMEZA Meza9 kuukautta sitten
  • Casing rides is actually the original owner theres a vid on his channel

    Wyatt GoreWyatt Gore11 kuukautta sitten
  • Hand winch and a floor anchor would have done it

    Will ClairmontWill Clairmont11 kuukautta sitten
  • Love the gen 1 raptors. You should see if Raptor liners can do a blue tinting... best of both ideas 👍🏼😈👍🏼

    MomoMomoVuosi sitten
  • I have those shoes as well bro [Air Max 90's] -- love them!!

    Joseph LeeJoseph LeeVuosi sitten
  • should've just ratchet strapped that bumper down to bend it in place and do the weld. RIP endcap

    FHM ChrisFHM ChrisVuosi sitten
  • Hello, what did you originally pay for it??

    Miguel EstradaMiguel EstradaVuosi sitten
  • Headlights? What brand and part number

    F150 FanaticF150 FanaticVuosi sitten
  • Ok so I really need to know who is the red headed girl in the background at 1:11....what's her IG?! Lol

    Vasiliy VoroninVasiliy VoroninVuosi sitten
  • Thought u guys were gonna heat a lil

    RealDriverRealDriverVuosi sitten
  • wth,,,,all you spend on money and time,,,you could of had this thing align for about or less than what you spend....stop being to cheap....get a come along to pull out the bumper,,this thing are at good old Harbor F....for about 20-30 bucks

    Angel De la CruzAngel De la CruzVuosi sitten
  • That’s what I need a big truck I had a couple tundras in my time and love trucks . Sucks now I just had hip surgery and I own a lil Camry but I can’t drive it it’s to small and I can’t bend certain ways sucks . Truck looks great and job well done love the videos

    Big EasyBig EasyVuosi sitten
  • i hope you spun the wheels for out of round and hope you put metal on the rim instead of a bulging tire on one side.

    Thor ThunderThor ThunderVuosi sitten
  • Why not use the winch to pull bumper a lot more control

    Chad JohnsonChad JohnsonVuosi sitten
  • Less wide, does mean skinnier.. "The opposite of wide is narrow, and your example is correct. If you're talking about the depth of the device, you could say it is thinner or skinnier. You could also say it's less wide if you don't like using narrower.

    Dave SmithDave SmithVuosi sitten
  • Ok.. ....... this new sub likes it likes it alot.... Thanks

    VINMAD666VINMAD666Vuosi sitten
  • Maybe a new air filter?

    Ratz8861Ratz8861Vuosi sitten
  • fuckin hacks bud

    Andrew PhillipsAndrew PhillipsVuosi sitten
  • a german mechanic died with a heart attack after watching these "repair" vids

    Boden EffektBoden EffektVuosi sitten
  • what is the name of the song at 4:17?

    Nexcron PlaysNexcron PlaysVuosi sitten
  • Alignments are always very slightly toed in...

    YooTooobJeffYooTooobJeffVuosi sitten
  • 🤦‍♂️

    Victor DA_PVictor DA_PVuosi sitten
  • I think B is actually for blabbermouth!

    Charles DegenerCharles DegenerVuosi sitten
  • The dealer is the only one who could certify the repairs done to that vehicle and when someone runs the Vin number they’re going to see the damage that was done to the truck and that u purchased it from copart and you have no certification of repairs

    Todd JusticeTodd JusticeVuosi sitten
  • L””oz

    Piotr KrawieckiPiotr KrawieckiVuosi sitten
  • Awesome dude!

    Jay BatsJay BatsVuosi sitten
  • Best rebuild vids ever. Sorta like a roadkill but more home style. Love the shaky cam. Don't change as it shows this isn't some scripted production pretending to be a homie.

    spanky arsespanky arseVuosi sitten
  • I wonder how accurate that wheel alignment was.

    iLovewoodiLovewoodVuosi sitten
  • What was your bid the auction?

    Dusty HarrisDusty HarrisVuosi sitten
  • Have never seen such huge suv in India, but I love my nimble 800cc Suzuki

    Hitesh RawatHitesh RawatVuosi sitten
  • I know I'm months seeing you. But you not being a real body man. But next time use heating trouch. Everything will bend back easier.

    Mike. ValdezMike. ValdezVuosi sitten
  • Nooooooice!!!

    Lee VueLee VueVuosi sitten
  • Leave the fender red!

    N.R.N.R.Vuosi sitten
  • So, how much did this thing go for at the auction?

    Not YouNot YouVuosi sitten
  • If u were to put a strap through the rim and then wrap it 1 time around the tire attach other end to bumper an gave it a couple bumps forward it would have helped pull it almost straight down 😉

    Derek GuloshDerek GuloshVuosi sitten
  • That inner tie rod is benttttt

    mike kraussmike kraussVuosi sitten
  • What does OEM mean??

    Robert PhippsRobert PhippsVuosi sitten
  • I must repeat the millionth time no Raptor liner lol

    420_ GrindersClub420_ GrindersClubVuosi sitten
  • My husband loves the show! Your doing a great job very inspiring, I watched this one with him and told him that your truck was a Frankenstein Raptor! 😅

    Ramon SiqueirosRamon SiqueirosVuosi sitten
  • You didn't tell people too disconnect the battery . B . Don't forget to measure man children may watch you near enough is not good enough

    DanielJones JonesDanielJones JonesVuosi sitten
  • I wanted to hear it running.

    samntim ramseysamntim ramseyVuosi sitten
  • A friggin laser on a friggin sharks head would of been a lot faster than a pice of string

    r6bunnyr6bunnyVuosi sitten
  • U just suck u are such a scrooge

    SAMSAMVuosi sitten
  • That inner tiered is bent lol

    Ryan LindsayRyan LindsayVuosi sitten
  • For the frame repair check with a suspension lift installation shop like 4wheel parts on 82nd or any les Schwab tire shop and see if they have factory lower control arm pockets. The factory parts are cut off the frame and new drop crossmember have the new pocket included. Be best way to get it fixed properly

    Mike AndersonMike AndersonVuosi sitten
  • Stoked to see how far your welding skills have come! From only tacking to having some nice stacks. Well done man. Can't wait to see what is next in the build!

    positiverossmanpositiverossmanVuosi sitten
  • A blue 6.2l raptor. One of my favorite cars ever.

    f0rumrrf0rumrrVuosi sitten
  • You just seem to be bodging for the sake of it. Why try and weld the bumper whilst it's attached how can you spray it properly. Also the chassis will need setting on a jig to check its not twisted. This could be a death trap.

    IK UKIK UKVuosi sitten
  • Ебаать думал Конор Макгрегор!!!!

    Marat KhurumovMarat KhurumovVuosi sitten
  • That red looks amaIng

    paquitos hammerpaquitos hammerVuosi sitten
  • Get rid of the bumper

    paquitos hammerpaquitos hammerVuosi sitten
  • Famous last words "that's not gonna break. That's not gonna go anywhere."

    Jeff SchmittJeff SchmittVuosi sitten
  • I might be interested in those aftermarket headlights when you go to do the face lift....if you still have them.

    Metman2JMetman2JVuosi sitten
  • Vim pelo beloto 🇧🇷🇧🇷🇧🇷🇧🇷

    Pedro RafaelPedro RafaelVuosi sitten
  • Am I the only one who likes the old Raptor more than the newer facelift model ??? especially with those widebody fenders ...

    Yanc0_Yanc0_Vuosi sitten
  • Make a thailand drag style raptor. Hahah

    Timothy JantingTimothy JantingVuosi sitten
  • mcneal fiberglass 1 piece the front

    TTVuosi sitten
  • Video is great,prolly cuz I'm high

    jugernaut shawjugernaut shawVuosi sitten
  • Shooting at it a new weld technique

    Jeff ShimateJeff ShimateVuosi sitten
  • Now get yourself to an alignment shop !!

    CrimeVidCrimeVidVuosi sitten
  • B is for Build painting, true story 15:38 :) Keep going Chris :)

    Franksey180Franksey180Vuosi sitten
  • Moving your hand in front of the camera makes it constantly try to focus man. Quick way to give viewers a headache.

    Danny CallihanDanny CallihanVuosi sitten
  • I’m also in Portland do you guys have a repair shop I need to fix my 12 sti lol

    Oscar BOscar BVuosi sitten
  • Am. Did Nike sponsor you

    saieed joshua elijah mohammedsaieed joshua elijah mohammedVuosi sitten
  • Dam bro you need to listen when you edit after every sentence you suck air an it's hella loud you do it right in the mic are you that winded it's super annoying please try to fix

    Matt SouzaMatt SouzaVuosi sitten
  • Truck is in a collision...Only sets the toe. Guarantee there are caster / camber issues in that corner.

    rocketstutorialsrocketstutorialsVuosi sitten
  • Chris, what do you think about these headlights? Do they perform well? Good coverage at night? I was thinking about ordering a set for mine...

    Joe CangialoseJoe CangialoseVuosi sitten
  • if I play this at .5 speed, you sound like you are drunk....

    RozzbournRozzbournVuosi sitten
  • What the hell happened to this channel? Used to be do it right and the best you can with what you have. Now it’s order whatever, force it to fit, do it wrong, be lazy to do it right, short cut, no content or progress, and crap work. Filled with commercials and sponsor adds. It’s sad. I used to LOVE your channel. Officially unsubscribed after all this time.

    Todd SchroederTodd SchroederVuosi sitten
  • Paint newly welded parts? Rust = Bad

    Adam MartinAdam MartinVuosi sitten
  • Awe b is for broke key rings sold out sad day

    ScrapperScrapperVuosi sitten
  • I think the hood should be painted white

    Dave's Custom JunkDave's Custom JunkVuosi sitten
  • We’ll start painting so things will start going poorly 😂

    Jacob ArendtJacob ArendtVuosi sitten
  • I would be curious to know if the total cost was less than buying a raptor used. I really do enjoy these kinds of videos but one thing that these people never talk about is the money.

    Micheal SmithMicheal SmithVuosi sitten
  • Nice Blazers Tee!

    glenn ridenourglenn ridenourVuosi sitten
  • So far, you've done a straight shitty job on this truck... Over build a 240 Z that never gets driven, but hack together your everyday driver... This thing ways 3X what the 240 does. You didn't even bother to paint the bare steel surfaces...

    Ryan DavisRyan DavisVuosi sitten
  • i want to learn that how to drive

    paulvincent severopaulvincent severoVuosi sitten
  • nice and easy!

    drugpusherfulldrugpusherfullVuosi sitten
  • What bumper is that?

    Zachary NewmanZachary NewmanVuosi sitten
  • Please paint the chassis a bit while the body panels are off, same for the undercarriage, then after painting the undercarriage, undercoat it AND its fender wells!

    NautricityNautricityVuosi sitten
  • Is this truck for yourself or do you buy and flip vehicles?

    Milo ManMilo ManVuosi sitten
  • Ford Nebula

    M TaufiqM TaufiqVuosi sitten
  • HELP tallguy with his hellcat !

    jaycee _jaycee _Vuosi sitten
  • Did anyone else see the bent inner tie rod end??

    A KBA KBVuosi sitten
  • Nice job. Beautiful truck. Never been a Ford fan but I would drive a raptor.

    Richard BerryRichard BerryVuosi sitten
  • 9:69 nice and straight" uhh, not quite.... Cool project though. Replace that passenger inner tie rod ( and then re align it)

    a2cryssa2cryssVuosi sitten
  • So does this truck have a salvaged title?

    Thankful GamingThankful GamingVuosi sitten