Installing a Stand Alone ECU on the LS Powered Huracan - Haltech Elite 2500

510 768 Näkymät

In todays episode were installing our Haltech Elite 2500 into our LS powered Huracan. Huge thanks to Haltech for all the support!
Check out Haltech at:
❱ Shop -
❱ Patreon -
❱ Facebook -
❱ Instagram -
❱ Twitch -
Fareoh - Cloud Ten

  • Hey quick question has anyone ever seen twin Mexicans I’ve been alive for 24 years and have yet to see one

    The HitManThe HitMan5 kuukautta sitten
  • I like how you explain some of the simple stuff for people. I have been building cars for years. But always learn something new every day. No such thing as a dumb question. The basis are most definitely the foundation for any greatness. Thank you for the insight for the cheapest way around all the most expensive parts, like chevy LS. Great job!

    Darrell BakerDarrell Baker6 kuukautta sitten
  • Guys, Mad props for doing the wiring! I follow a lot of engine swaps over the years and the part that scares folks the most is the wiring! it's a lot of the reason people chose older style engines so they don't have to figure out the electronics! I have an electronics background and doing the wiring sounds like fun to me. I'm not sure I'd take on a Lambo... Thanks for the build! It should be really amazing! I know you're done already, but I wanted to watch the build first!

    Bill KlementBill Klement7 kuukautta sitten
  • This episode is dizzying... shout out to Oscar for being emphatically meticulous...

    stuebal629stuebal6299 kuukautta sitten
  • This was super ambitious. There's professional shops with two dozen employees that wouldn't take on this build, let alone with a 5 month time frame.

    Pennsyltucky Counter TerrorismPennsyltucky Counter Terrorism10 kuukautta sitten
  • B is Build if i want the same car Lamborghini built with the V12 two twin turbos would you built It For me.

    conrad testamarkconrad testamarkVuosi sitten
  • if he ever sells it and gets more than like 10k... ill be shocked. such hackery. anyone can see that.

    Panic FartsPanic FartsVuosi sitten
  • I run an elite 1500 in my dsm these are pretty bad ass ecus

    Tyler BramblettTyler BramblettVuosi sitten
  • I used a ECU out of a fleet/commercial GM truck for a stand alone ECU in a FJ40 swap I did in college. Back in the day (2002) when 400hp was impressive in a #2800 vehicle.

    Tom RayTom RayVuosi sitten
  • You need a better volt meter. Try fluke

    Martin GarciaMartin GarciaVuosi sitten
  • Comment. Cause it helps :-)

    SfL MeSfL MeVuosi sitten
  • This thing is an absolute disaster. I couldn’t imagine trying something like this... ever

    turbanwearersblowturbanwearersblowVuosi sitten
  • We are going to move these electronics closer to the heat source. I kid. Enjoying the content, the music - bleh.

    John DoeJohn DoeVuosi sitten
  • My brain hurts just watching this video,respect dudes

    simon Smithsimon SmithVuosi sitten
  • Adam when are you gonna do something with Marty, Moog, Alan and Benny from Might Car Mods. You could do some sick project car swap like they did with Hotrod garage years ago.

    mick hodgsonmick hodgsonVuosi sitten
  • Who is this Oscar guy. He is unbelievable. But you never give him any time to speak.

    MsMrglennMsMrglennVuosi sitten
  • These guys must have been computer gurus In another life. Total Greek to the average guy.

    Gary McCoyGary McCoyVuosi sitten
  • its not allways a good idea to mix and match ecu's between the cars as they can jump intoo limp mode , i have a smart fortwo (not exactly a lambo by a long shot ) but it stores the milage intoo the dash and the ecu , mix those two trows it intoo limpmode and you need to connect a dealer computer to make everything play nice again

    watahyahknowwatahyahknowVuosi sitten
  • Wonder if the people at Lamborghini think this is great or are more like WTF. Ferrari would have sued by now

    William StarkWilliam StarkVuosi sitten
  • Oh my God,... the amount of work involved.. You guys are hard-core.

    J KoJ KoVuosi sitten
  • Looking at it just thinking, what a head fuck

    vkturbovkturboVuosi sitten
  • Oscar is the BEAST! Hope he's well compensated. Fun to watch you guys thrash.

    Bruce JarrettBruce JarrettVuosi sitten
  • I’m a little concerned with wiring going on with the inlet ports uncovered.

    mick coomermick coomerVuosi sitten
  • I think you need to number your episode so be easy to find them

    Carski1986Carski1986Vuosi sitten
  • As Adam LZ would say, nice Ferrari bro

    TRD_SR5TRD_SR5Vuosi sitten
  • Love it the engine GM v8 swap idea but I don't know exactly what kind of the transmission maybe zf ?? But definitely it's not G50

    Hassan NaderHassan NaderVuosi sitten
  • Lambo purests will be spitting their Chandonny out 😂 they forget it’s an Audi product so meh. Also Hoovie LS swapped a Porsche 😂

    RichieT5RichieT5Vuosi sitten
  • You should build a Factory five GTM supercar next! 🤙

    519crx519crxVuosi sitten
  • How to piss off every Italian; guy put an Ls in it

    Evolution GarageEvolution GarageVuosi sitten
  • Oscar is MPV doing all the hard work with a smile on.

    Justin JesusJustin JesusVuosi sitten
  • B is built i hope this lambo smashes gm’s new corvette !

    Ezekiel CcEzekiel CcVuosi sitten
  • Lamborghini with a LS engine? What's the point?

    HOLLYWOOD 809HOLLYWOOD 809Vuosi sitten
  • OSCAR! He is the Man! I hope you are taking care of him... Without Oscar your build would be in boxes... On the shelf...

    BossaNossa1BossaNossa1Vuosi sitten
  • Oscar the BEAST!!

    Danny S.Danny S.Vuosi sitten
  • Why don't you cover the intake ports while you're working over top of them? Jeez

    RA KaiserRA KaiserVuosi sitten
  • i swear the outtro music either brings me to tears or extreme happiness, bring me too tears is how im feeling right now 😭 tears of joy done finished a whole video of bifb

    amari odomamari odomVuosi sitten
  • I don’t even know how you guys can fix all this. I’d be making anxiety attacks just by looking at it if i had to fix this.

    ShowStopper411ShowStopper411Vuosi sitten
  • Hey that "on" position is set on a timer and will probably turn off after a while, killing the power to the ECU?

    HildorVideoHildorVideoVuosi sitten
  • Check out Specialized ECU Repair FIstream channel

    M DM DVuosi sitten
  • I'm sure someone has offered but if you send the wire diagram for the Lambo and the Haltech I would be happy to see if I can find a way to wire the factory switch to start the car. Might take a relay or three...

    Sean LeachSean LeachVuosi sitten
  • What is he using to rewrap the wiring harness? Doesn’t look like electrical tape 😂

    Tony PitaleTony PitaleVuosi sitten
  • This is so cool

    HaltechHaltechVuosi sitten
  • B is for Burntacon

    Lovell MillsLovell MillsVuosi sitten
  • probably ask the one who worked on alex most hated lambo

    Norman PattersonNorman PattersonVuosi sitten
  • next Gen corvette to be mid engine

    Haute AgentHaute AgentVuosi sitten
  • this car is asking for the holley dual tb intake

    Tom RoestTom RoestVuosi sitten
  • Song at 9:40 ?

    NigaCuuskaNigaCuuskaVuosi sitten

    John-Murray HofmeyrJohn-Murray HofmeyrVuosi sitten
  • Why not axe all of the Lambo wiring? It seems like it's just being kept to run that speedometer display. There's so many wiring harnesses from Lambo there, seems like a lot of weight, complication, and cost to keep that stuff. Put in an aftermarket gauge into the old cluster bezel and make a CF panel to fill the gaps. And just remove all that Lambo wiring. The build looks great, I'm just curious why stick with all that Lambo wiring.

    1Kurgan11Kurgan1Vuosi sitten
  • 20:10 That wire stripper is a tool made by God himself. I got one a while back and have not looked at my other wire strippers since. i did a review on the one i got because i was so excited about it. Sometimes I have to work on 22-24 gauge wire so this makes it easier.

    Young GrizzlyYoung GrizzlyVuosi sitten
  • I think you have to swap the cluster over as well, at least in VWs the dash cluster is also programmed to the vin. Check the coding with your vag com.

    9K_ALLDAY9K_ALLDAYVuosi sitten
  • Oh I didn’t know it did canbus. Endless opportunities

    Frank’s GarageFrank’s GarageVuosi sitten
  • Why don’t you use the starter wire from the lambo? Hit button ignition on hit again starter engage.

    Frank’s GarageFrank’s GarageVuosi sitten
  • Great video. But I would run O gauge OFC under car and 4 gauge OFC to starter.

    Frank’s GarageFrank’s GarageVuosi sitten
  • I wouldn’t know where to start with all these wires harnesses ecu etc etc .... kudos to you guys lol stuff looks like a big headache

    Louis FeracaLouis FeracaVuosi sitten
  • Nice to see you're using hi-tech diagnostic equipment to help trace your Huracan wire paths, courtesy of free DVOM from Harbor Freight!

    rixtrix11rixtrix11Vuosi sitten
  • Crispy Bull comin' along piece by piece.

    Gravitycat24Gravitycat24Vuosi sitten
  • I can't get my phone to talk to my printer. Little help?

    Rev. David WillerupRev. David WillerupVuosi sitten
  • JJ auto wrecking for all exotic cars parts and domestic

    Ed WilkoEd WilkoVuosi sitten
  • Use caution when probing random wires with the volt meter. If you attach a new circuit to an existing circuit you need to know more than if it is switched power. You can fry or disrupt/disable modules or a modules function. very dangerous.

    jarchambault69jarchambault69Vuosi sitten
  • The immobilizer is in the cluster pal

    • You can shoot me a dm if ya need a 🖐🏻

      MANCOBRAMANCOBRAVuosi sitten
  • Start button should be the Red one on the center console

    maemirandamaemirandaVuosi sitten
  • I might sound like a noob but can he not use the ecu that he’s installing right now for the key?

    Nathan EvansNathan EvansVuosi sitten
  • Get the "Tuning Fork" to tune it!!!!

    Antonis PAntonis PVuosi sitten
  • Lambo Doors please!

    Jinn NuestroJinn NuestroVuosi sitten
  • Totally dig your build brother I’m an old school gear head love it

    Clayton SmithClayton SmithVuosi sitten
  • Putting a GM motor in it you might as well get a kit car!

    vlodpgvlodpgVuosi sitten
  • The ECU may not have to physically installed. The data lines may pass through the modules in series and you may just have to connect the data lines together to bypass the missing modules.

    greg simpsongreg simpsonVuosi sitten
  • I don't know why going all the trouble of using the lambo keys (if you can just remove the keys and use the car without it)... But if you want that working, you will need a bcm2, a key and a ECU EDC17 that has the security codes syncronized. I think that even if you buy everything from the same car in a savage, you will need to connect the ecu to a computer and perform the resync of the security keys.

    Ru13en12Ru13en12Vuosi sitten
  • can you talk to the gays Sam crac used in his recent Ferrari video

    Richie MRichie MVuosi sitten
  • All that wiring gave me a headache and anxiety

    Ilya KharkovskiyIlya KharkovskiyVuosi sitten
  • If any parts of the engine run into the body panels you should cut the panel so it would work, it would look cool

    ratrod gusratrod gusVuosi sitten
  • Im not that smart on car and I have advice do you think of body panels so that you don't have to remove them when working on those connection or something else on the rear

    Ally SaidAlly SaidVuosi sitten
  • It still looks like a Smart Car without the rest lol

    Quick MindQuick MindVuosi sitten
  • how about you try buy proton iriz and rebuild ..that car very awesome after modified bro..

    mohamad firdausmohamad firdausVuosi sitten
  • Haltech is all I run in all my cars

    Matt PrattMatt PrattVuosi sitten
  • Put some subtle flamrs on the car when its finished 🤙

    NotoriousBAYNotoriousBAYVuosi sitten
  • At what point do they have to start thinking about fuses and circuit breakers....or are they going to install a fire extinguisher system? I bet Oscar gets that job too!!

    Sean SullivanSean SullivanVuosi sitten
  • Will this swap not underperform the car stock?

    Joe NasonJoe NasonVuosi sitten
  • Frame rails through the cabin tho

    Carter Heavy IndustriesCarter Heavy IndustriesVuosi sitten
  • These cars are really big multi computet systems😳 quite interesting!!

    Bas eBas eVuosi sitten
  • Seriously guys make this a racecar or drift car for your channel or something like dont let this thing live without turbos or superchargers guys come onnnnnnmnn

    A ToasterA ToasterVuosi sitten
  • This wiremess looks like nightmare.

    RefirrusRefirrusVuosi sitten
  • 1mil sub special needs to be a drift build

    Ellis CareyEllis CareyVuosi sitten
  • The car that Oscar built

    sbirdranchsbirdranchVuosi sitten
  • Can you create a playlist for this build?

    Rokas NausedaRokas NausedaVuosi sitten
  • i wold have mounted the Haltech in the engine bay

    Daniel BrownDaniel BrownVuosi sitten
  • This is coming really good Congts..

    Mr. Wig.Mr. Wig.Vuosi sitten
  • Why not use Audi stuff for the key problem. Probably way cheaper and mostly the same.

    Jan VJan VVuosi sitten
  • 19:44 "We know exactly kind of what they do." Classic confidence inspiring statement.

    BrettBrettVuosi sitten
  • If you have a copy of Vag-Tacho you can read the key codes, which then get programmed to the cluster, ecu , and modules with a copy of VCDS.

    Throttle GrottoThrottle GrottoVuosi sitten
  • Awesome build y’all are doing! Can’t wait for new content.

    AfwillAfwillVuosi sitten
  • Holy hell almost a million people subscribe to this channel!

    Clayton YatesClayton YatesVuosi sitten
  • Taking a car with one of the best V10's in modern history and putting in the most plain jane V8 known to man. Odd choice

    Onoff314Onoff314Vuosi sitten
  • Anyone think of Stranger Things at 21:40?

    Leo V.Leo V.Vuosi sitten
  • Australian rep for the haltec if you like this channel check out mighty car mods its and ozzie channel and they work with haltec all the time tuning fork is amazing thats what they call the tuning guy

    Big TastyBig TastyVuosi sitten
  • B is for Burntacan

    Mitchell GildeaMitchell GildeaVuosi sitten
  • Hellll yeah boi!

    Manuel MarungoManuel MarungoVuosi sitten
  • You should contact the place called specialized ECU Repair, from what I’ve seen of their FIstream videos they could probably help with getting everything to talk to each other, and they can make keys

    robert bruntrobert bruntVuosi sitten
  • Saw your block at Texas Speed yesterday....looks great!

    BrittleSpeedBrittleSpeedVuosi sitten