Painting the Huracan Frame and Building Carbon Fiber Doors

31.10.2019
575 904 Näkymät

In today's episode we repaint the huracan engine bay/frame and then jump into building carbon fiber door skins. Huge thanks to our sponsor fibreglast.com for supporting us on our carbon fiber journeys.
And thanks to Wrapco PDX wrapcopdx.com follow them on insta/FB @wrapcoPDX , if you're in the portland area hit them up for all your wrapping/signage needs.
And if you're looking for my awesome turbine spraying system, head over to hvlp.com/ and look at their lines of turbine spraying systems.
❱ Shop - bisforbuild.com/
❱ Patreon - www.patreon.com/user?u=3364742
❱ Facebook - facebook.com/bisforbuild
❱ Instagram - instagram.com/bisforbuild
❱ Twitch - www.twitch.tv/bisforbuild
Music:
Fareoh - Cloud Ten

Kommentteja
  • Why does everyone give them so much free shit?

    John MellorJohn Mellor3 kuukautta sitten
  • it's hard to believe that the roof and interior wasn't even covered by a simple bed sheet or something. would take two minutes. i noticed something similar in a previous video where the roof was repaired and the entire engine compartment was left open to body filler dust. ridiculous.

    Blade RunnerBlade Runner8 kuukautta sitten
  • Taking so much effort for making the doors only 100 grams lighter... If you are building a lightweight race car, why don't you throw out all the heavy electrical systems, like electric windows and electric lock, and make it manual.

    Laszlo AttilaLaszlo Attila10 kuukautta sitten
  • That’s not how you take a door skin off

    Anastasios PezosAnastasios Pezos11 kuukautta sitten
  • please buy the babe some work gloves you killing her hands :) cheers

    Olympus TechOlympus Tech11 kuukautta sitten
  • Rubbing filler and cutting carbon fiber is not a great idea in a spray booth... you will always be fighting debris in your paint

    James TJames T11 kuukautta sitten
  • Music on 5:00 ?

    VablemeVableme11 kuukautta sitten
  • Door poppers are all good. Until, like every B is for Build car, the battery goes flat...

    T MT M11 kuukautta sitten
  • Love the videos. Is the yacht coming back?

    sweedish walrussweedish walrus11 kuukautta sitten
  • That bug in the right corner in the water is funny as hell hahahahahaha wtf?!?! 5:37

    C CatoC Cato11 kuukautta sitten
  • I hope you have a way to charge your battery with locked doors.

    hsenseihsensei11 kuukautta sitten
  • Uuugh sEmAcAR. And you are using a spray can... waste of our time

    ToadwineToadwine11 kuukautta sitten
  • 🎳🎮🎨

    Ace HardyAce Hardy11 kuukautta sitten
  • So much hate in the 98% of comments, he should do this he should do that. What I see is this: The main objective is to take the car to SEMA NOT RACING THE CAR AT SEMA..... so he is making a HUGE EFFORT to acomplish that in no time, after the show... im sure Chris will make things right.

    JESUS ALBERTO MEDINA GARCIAJESUS ALBERTO MEDINA GARCIA11 kuukautta sitten
  • A good tip for removing door skins quicker and easier is to just to grind all the way around the very outside edge (as in 90 degrees to the face of the skin) until you grind through the fold and the skin will then basically peel straight off.

    Home Built By JeffHome Built By Jeff11 kuukautta sitten
  • NO DP BLACK420!!

    David SDavid S11 kuukautta sitten
  • The music at 13:19 brings back memories of the M5... who is still here?

    CarspotterCarspotter11 kuukautta sitten
  • The music at 13:19 brings back memories of the M5... who is still here?

    CarspotterCarspotter11 kuukautta sitten
  • Me: *takes a shot everytime door is said* Also me: *thinking of that theme song in Underground 2*

    Rui KazaneRui Kazane11 kuukautta sitten
  • *"Now Kyle is going to hack a perfectly good Huracan door apart with a grinder." *Paraphrasing

    GoodballaGoodballa11 kuukautta sitten
    • Oh, and we are excited about it...

      GoodballaGoodballa11 kuukautta sitten
  • The doors should've really been made full carbon. Just the outside panel is like 20% of work. and it's going to get wrapped. It feels le it's made like this just so you can say it's carbon :/

    krneki44krneki4411 kuukautta sitten
  • I guess I'm not understanding why anyone would go to such lengths to build a piece of shit. Will this be better than the real thing?

    WillWill11 kuukautta sitten
  • Am i the only one noticing the bug on the water going around the shop?

    Hero GalvezHero Galvez11 kuukautta sitten
  • If it says 420 on the adhesive you know it's good stuff

    THE SHANANIGANSTHE SHANANIGANS11 kuukautta sitten
  • The boat???????????

    French RickFrench Rick11 kuukautta sitten
  • wish it was coming through Kingman AZ like all the other cars heading to SEMA

    Rick TurkRick Turk11 kuukautta sitten
  • What booth is your car going to be in ?

    David BrooksDavid Brooks11 kuukautta sitten
  • Looks simple rear frame.. all can made it

    Fajar 5TPFajar 5TP11 kuukautta sitten
  • Frame and doors look awesome!

    Ethan MacherasEthan Macheras11 kuukautta sitten
  • The deeper you get into this build the less sense it makes. I appreciate your skill but the concept is terrible. Maybe it’s all about cheap horsepower but this is becoming a weird custom kit car or something.

    Fee_ LoFee_ Lo11 kuukautta sitten
  • Builds a 1500hp deathtrap, makes sure noone is getting out alive by removing doorhandles. Brutal :D

    Matthias GroddeckMatthias Groddeck11 kuukautta sitten
  • got a simpler tip for removing door skin , just grind edge of skin and the whole skin comes off as one piece , just grind lip til you see the skin and lip separate thats peened over into inside of door , thats how bodyshops do it

    John AlmJohn Alm11 kuukautta sitten
  • Where is the next video? please update.

    Toufiqur Rahman ToufiqueToufiqur Rahman Toufique11 kuukautta sitten
  • People need to realize that he's an amateur rebuilding a totalled Lamborghini that had no rear or front end. Also, doing it in his garage. Pretty sure he's doing better than 99% of people talking crap could do. That being said, so much overspray...

    Garrett UnderwoodGarrett Underwood11 kuukautta sitten
  • Your girl is for the culture man💪🏾🤧 i fucks with the vibes bro😂💯

    JDM HAWTBOIJDM HAWTBOI11 kuukautta sitten
  • So what happened to daily content lol

    BionycWolfBionycWolf11 kuukautta sitten
  • You need to marry Chelsea (hope I got her name right) because any woman willing to get dirty with you is a keeper.

    Alexander ShawAlexander Shaw11 kuukautta sitten
  • I'm watching this episode again and telling myself that it's a new episode. Its excruciating waiting between episodes.

    Eddie _Eddie _11 kuukautta sitten
  • Waiting for new episode :(

    83Nipa8383Nipa8311 kuukautta sitten
  • It looks like hes got a screw in the tyre

    Nick WisniewskiNick Wisniewski11 kuukautta sitten
  • Sema goers will admire the work but will have no idea on how to appreciate all the work...

    Almost SeriousAlmost Serious11 kuukautta sitten
  • He’s gonna have a black Sparco steering wheel with two red buttons on it.

    Tony CondorTony Condor11 kuukautta sitten
  • Nobody: The insect in the bottom right corner of the screen when he was painting the engine bay: Drowns

    Charming nowhere to hideCharming nowhere to hide11 kuukautta sitten
  • I was getting worried that Chelsea was gone! Nice to see thats she's still kickin! So when is the wedding?

    cyr16cyr1611 kuukautta sitten
  • Awesome build! Remember to have a hidden alternative way to open a door, or way into the car, for if and when an actuator, battery, or anything else fails that would keep you from getting in. You’re obviously mechanically inclined, so more than likely have that covered. This is just a friendly reminder

    Brian RobertsBrian Roberts11 kuukautta sitten
    • All these bad comments about the car😒😒 seriously at least hope for the best

      Charming nowhere to hideCharming nowhere to hide11 kuukautta sitten
  • Whats the material on Huracan doors? would it be just about the same weight to keep the doors instead of using painted fiber ?

    titochuztitochuz11 kuukautta sitten
  • Dudeeee how’s the gtr the other huracan n the boat dudeee update videos after sema plss ? And love the progress of this car it’s come a long way , when I first saw it I had so much doubt but it’s turned out better than I can imagine love the channel dude

    Ashlee DanversAshlee Danvers11 kuukautta sitten
  • Love telling someone about your work and then seeing you at the same time at BWW!!!

    Adam McGeeAdam McGee11 kuukautta sitten
  • Do you think this car is gonna make it the sema

    ryan brownryan brown11 kuukautta sitten
  • is carbon fiber lighter than fiber glass? i know its stronger.

    Edd JordanEdd Jordan11 kuukautta sitten
  • Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?Did you finish it?

    Rey BaybayRey Baybay11 kuukautta sitten
  • I'm waiting for upload Chris!!!!!!

    kbugaykbugay11 kuukautta sitten
  • I hope that repaired door wasn’t aluminum on that back side

    toadsquad217toadsquad21711 kuukautta sitten
  • Hot Girl Friend.. Put a Ring on it.....lol

    Jeremy CornelleJeremy Cornelle11 kuukautta sitten
  • Dude 44 on trending as I'm watching!

    Amrit SinghAmrit Singh11 kuukautta sitten
  • I don't understand the point of these carbon door skins. They don't save weight, they're being wrapped, and they take so much time.

    hu flung dunghu flung dung11 kuukautta sitten
  • The removal of the door skins made my teeth itch.

    Lee ColeyLee Coley11 kuukautta sitten
  • Sema is in 2 days and the car doesn’t have its engine in yet

    Fabian DelgadoFabian Delgado11 kuukautta sitten
  • All these bad comments about the car😒😒 seriously at least hope for the best

    THii_ PURG3THii_ PURG311 kuukautta sitten
  • You just ripped off a super expensive lambo door, and you are excited about it! OmG

    Michel AdochimMichel Adochim11 kuukautta sitten
  • Chris you have modded an electrically operated door latch release, not a door "popper" you will still need a handle of some sort to pull the door open I would think, not only that, I can't see your mod as being legal for obvious reasons

    AcousticFoxbuskersAcousticFoxbuskers11 kuukautta sitten
  • U better wash the engine bay

    Dass autoDass auto11 kuukautta sitten
  • What tires are those

    monkeyman 911monkeyman 91111 kuukautta sitten
  • I recommend you watch this video with the playback at 2

    Exsert wormExsert worm11 kuukautta sitten
  • B is being unable to go to sema

    Avinash SangleAvinash Sangle11 kuukautta sitten
  • What is the point of the door skins

    senior prospectus2016senior prospectus201611 kuukautta sitten
  • Tavarish just shouted you out on his channel

    Jeremy KiddJeremy Kidd11 kuukautta sitten
  • From a Locksmith’s point of view... with shaved door handles, run some battery leads accessible underneath the car(or a nice hidden spot). In case, the doors are locked and the battery’s dies.

    Justin FlemingJustin Fleming11 kuukautta sitten
  • Put some carbon fiber to make it smooth not just black paint to cover the burned part.. carbon fiber overlay will make it more presentable.

    Daphne ArcillaDaphne Arcilla11 kuukautta sitten
  • As Rossini said "there is no greater inspiration than necessity". Five days to go!

    Peter GrovePeter Grove11 kuukautta sitten
  • Not sure those doors will pass safety inspection for a race track. Surely safety teams need a way to access the car in an emergency.

    The WebmasterThe Webmaster11 kuukautta sitten
  • What happen to trivia nights man

    Dylan WillingDylan Willing11 kuukautta sitten
  • How this car is gonna be done on time is beyond my imagination.

    Simon MoonSimon Moon11 kuukautta sitten
  • Could have tried Forged carbon looks much easier to do on edges!

    DaveRogers1985DaveRogers198511 kuukautta sitten
  • Correct me if I am wrong but your green Lambo must be scrap yard junk after all of the strippings?

    SuperDave DevSuperDave Dev11 kuukautta sitten
  • Why no video Friday?!?

    Str8Killin 843Str8Killin 84311 kuukautta sitten
  • There is a saying a spanish that is "el huevon trabaja doble" u should of just covered everything 🤦‍♂️oh well whats done is done

    MinatoMinato11 kuukautta sitten
  • B is for Give Oscar a Raise

    Cam MartinCam Martin11 kuukautta sitten
  • Shoddy work

    steven thomassteven thomas11 kuukautta sitten
  • this vs leroy

    thirtyroundgoonthirtyroundgoon11 kuukautta sitten
  • bring Chelsea out more

    Thomas MulakuThomas Mulaku11 kuukautta sitten
  • u should of rhino lined it tbh

    jack napierjack napier11 kuukautta sitten
  • Hiiii Chelsea!!!!!

    El SuenoEl Sueno11 kuukautta sitten
  • I love how he uses lamborghini wheels as beater wheels

    Ayden BruceAyden Bruce11 kuukautta sitten
  • I noticed the idea for the door locks didn't happen till you worked on the 2nd door and had already fitted the skin to the 1st frame so does that mean only 1 door will have working locks or did you retrofit to the 1st door afterwards?

    fly.w4vyfly.w4vy11 kuukautta sitten
  • Where is the next video

    Tim BraithwaiteTim Braithwaite11 kuukautta sitten
  • Depending on the track you will need a mechanical way for someone to open both doors from the outside, or you won't be racing it at a track at all. You will need a roll cage if its faster than 11.49 in the 1/4 mile. As well as a 5 point belt and full metal screw in valve stems. And now that I think about it, I would question if the turbo placement would pass tech inspection with only the headers holding them as usually turbos are mounted much closer to the engine so less pipe to flex.

    BlueDually4x4BlueDually4x411 kuukautta sitten
  • We better be getting some bad ass drag runs/videos after sema

    AngeloAngelo11 kuukautta sitten
  • loved the carbon fiber door build man!!!

    James WhelanJames Whelan11 kuukautta sitten
  • B is for balling on a budget

    Naman TaylorNaman Taylor11 kuukautta sitten
  • I'm addicted...

    Kurtz GarfieldKurtz Garfield11 kuukautta sitten
  • so how much weight did you save from the door panels?

    kody bradenkody braden11 kuukautta sitten
  • Watch redline racing in Australia. You would use cardboard behind the edges of the door. Use filler wax to radius to cardboard. Make mold onto the cardboard. You don't have tight bend over edge and have ton of room for flange for vac bag. Making inside door is real weight saver. Fill all holes with cardboard and wax radius. It's just as easy as outside.

    Kurt SumthinorotherKurt Sumthinorother11 kuukautta sitten
  • If you take a grinder to the edge of the door, you can grind through and separate the door skin much easier

    Alan SpanglerAlan Spangler11 kuukautta sitten
  • Holly shit you r number 35 on trending

    CrazyMotorMasterCrazyMotorMaster11 kuukautta sitten
  • So what happens when the door poppers fail? Loving the build and your approach

    Julian Stafford-WoodJulian Stafford-Wood11 kuukautta sitten
  • If you had a good door why bother making a CF skin for it? The damaged door makes sense. Am I missing something?

    Tarek ZTarek Z11 kuukautta sitten
  • Instant like!

    r6Luckyr6Lucky11 kuukautta sitten
  • This is a "racecar".... with stretched tires

    Chris GreerChris Greer11 kuukautta sitten
  • This video actually made it on the trending tab.

    Hope4NewDayHope4NewDay11 kuukautta sitten
FIstream