Should We Facelift The Raptor? Gen 1 ➡ Gen 2 Front End Conversion

676 227 Näkymät

In today's episode we've got a ton of new parts and a interesting new idea. Install Raid for Free ✅ IOS: ✅ ANDROID: Start with💰50K silver and get a Free Epic Champion 💥 on day 7 of “New Player Rewards” program.
❱ Shop -
❱ Game -
❱ Patreon -
❱ Facebook -
❱ Instagram -
❱ Twitch -
Fareoh - Cloud Ten

  • What rims are those?!

    Hunter SorensenHunter Sorensen22 päivää sitten
  • where can I order those same exact tires?

    Twaambo MwaseTwaambo Mwase5 kuukautta sitten
  • Swap swap swap.

    chris ediedrichchris ediedrich5 kuukautta sitten
  • Whens the conversation gonna happen, i haven't seen anyone try. Is it actually possible? The front end looks so much cooler on the 2nd gen but the 1st gen is a better truck

    Peter JPeter J5 kuukautta sitten
    • Peter J I’ve been waiting for a year

      KingTazler25KingTazler255 kuukautta sitten
  • It definitely needs to have a facelift

    Melinda CrowhurstMelinda Crowhurst5 kuukautta sitten
  • can you please number the episodes

    Christos panayiotouChristos panayiotou6 kuukautta sitten
  • As a safety measure when you are working under the car put some tires under it with the rim facing downwards. We here in Pakistan do it even when we're changing tires. This to prevent damage if the car falls off the jack or something.

    Kunwar KhalidKunwar Khalid7 kuukautta sitten
  • Face lift it will look better

    lee lipfordlee lipford7 kuukautta sitten
  • I was yelling at the screen when you were trying to reshape those control arm tabs GRAB THE TORCH AAHHHHH

    colin davidcolin david7 kuukautta sitten
  • Yes do the. Facelift!

    michael nnielsenmichael nnielsen9 kuukautta sitten
  • Yessss !

    Flnka_Ur_AceFlnka_Ur_Ace10 kuukautta sitten
  • What is the length and height of a Raptor? I would need to fit it in a tight garage

    Mark EdwardsMark Edwards11 kuukautta sitten
  • Keep it original dude.... is not a big wrap this best sure you got is too blue lol.

  • Did we forget that we are fixing this truck? Find a truck that has been hit hard somewhere other than the right front, cut the section you need from it and bring it home and graft it onto your truck. Can we fix it before we worry about facelifts?

    bob mbob mVuosi sitten
  • for the frambender 3001 you should make one end longer, that way it will stop when its straight

    Noah BartlettNoah BartlettVuosi sitten
  • Still have the 2017 fenders? LF side?

    stephen partidastephen partidaVuosi sitten
  • FACELIFT!!!!!!

    Adalberto SoldevilaAdalberto SoldevilaVuosi sitten
  • Yes

    Random ImpossibleRandom ImpossibleVuosi sitten
  • Do it!

    Lamont WilkersonLamont WilkersonVuosi sitten
  • You could benefit from a frame rack. Have a way to anchor the truck and tug on the bent parts. Like poles in the ground at 4 feet on all four corners. Then have a come-along pulling the bent parts.

    Dre HuntDre HuntVuosi sitten
  • HATE the BIG ford on grill........just me.........don't like badges or names on mine

    VINMAD666VINMAD666Vuosi sitten
  • New subscriber ~~~ so far so good....... thanks..............stay safe.. keep doin it..........PEACE

    VINMAD666VINMAD666Vuosi sitten
  • a vehicle with original color holds better value

    Thomas HollingshadThomas HollingshadVuosi sitten
  • Do the facelift

    Hunter BlantonHunter BlantonVuosi sitten
  • At 2.15 did I saw a 90's emblem on a GM square body??? 😐

    Zombie XZombie XVuosi sitten

    GT KingGT KingVuosi sitten
  • Yes please facelift the truck

    Nick PuthoffNick PuthoffVuosi sitten
  • the hydrolic is a body jack ... thats how its called : body jack

    crazymarge1crazymarge1Vuosi sitten
    • We always called them a "porta-power"

      Brad NoyesBrad NoyesVuosi sitten
  • Face lift

    Marius EimstadMarius EimstadVuosi sitten
  • Hell yeah face lift the raptor it will be so sick...

    Haveland KhuongHaveland KhuongVuosi sitten
  • Facelift...def

    Scott DonaldsonScott DonaldsonVuosi sitten
  • Portland! Hey it you ever get the chance.... My step dad owns Gresham 4wheel drive if you ever need lift kits or anything he's the guy!

    Dakota LawheadDakota LawheadVuosi sitten
  • I wouldn't facelift, I don't like to mix match

    Gary VarniGary VarniVuosi sitten
  • Good wheel and tire choice

    Gary VarniGary VarniVuosi sitten
  • Don’t face lift it it will look weird

    Beast BoyBeast BoyVuosi sitten
  • The thing is I would just buy a new one cause the right fender is broken and most of the parts for the raptors is a little expensive to get cause these parts are specially made for the truck I have the 2014 Ford F-150 raptor SVT black edition if you know what that once is

    Beast BoyBeast BoyVuosi sitten
  • welding in control arm mounting point, nope

    RombbbRombbbVuosi sitten
  • Use a stick...instead if your finger that is directly in front of the sensor...I it’s a thing for FIstream creators to stick their fingers in the shots but it’s really over done and annoying

    Canadian KRISPY BaconCanadian KRISPY BaconVuosi sitten
  • Ye Ford call it a molding But you say it is not a molding ..... Ye what the Fuck do Ford know

    chris macleodchris macleodVuosi sitten
  • Wood chisels???

    davkenremdavkenremVuosi sitten
  • Definitely do it

    JakeJakeVuosi sitten
  • Yes steering and frame geometry is so easy, 0.02mm tolerance in all planes. Should just take it to a frame shop before you started. Then do the bolt on bit's. Your way is going to cause castor and alignment issues.

    Marcus GrantMarcus GrantVuosi sitten
  • Hell yeah do the facelift!

  • Fiberwerx or Mc neil racing kit is cheaper to convert front end. As far the LCA pockets that are bent if it is the rear pockets that cross member can be replaced. If ford won't sell the part put a lift kit from fab tech, which replaces the cross members anyway. If it is only the front the pockets your method should work.

    wil Youngwil YoungVuosi sitten
  • I think I found the owner of it. It is chasing rides

    echo 20echo 20Vuosi sitten
  • Face lift

    iziiimadiziiimadVuosi sitten
  • Sorry to say this but your facelift looks bad. It looked better original

    GM Kof hardGM Kof hardVuosi sitten
  • FIstreamrs seriously needa carry around water cuz it sounds like alot of u guys get parched af and jus power through it lol

  • Should have got a Chevy

    Jaxson SteilsJaxson SteilsVuosi sitten
  • You should cement to your driveway for better stability

    JessayesssJessayesssVuosi sitten
  • It's called a Porta Power.

    George CicairosGeorge CicairosVuosi sitten
  • You really like being sponsered don't you No hate intended

    Hennry GrassHennry GrassVuosi sitten
  • Yes, the Gen 2 looks great. Whish they'd have kept the 6.2L in the Gen 2

    The Christian TruckerThe Christian TruckerVuosi sitten
  • Face lift 100%

    That Honda 420That Honda 420Vuosi sitten
  • Face lift yes do it

    its cadet timeits cadet timeVuosi sitten
  • Use your editing to point things out and stop using your fingers Lool 👉🏽🖍⬅️↙️↖️⬇️ 👊🏽👊🏽

    Zebadiah AlexanderZebadiah AlexanderVuosi sitten
  • You should have been sponsored by Reebok underwear! AHAHAHAH

    Yan BlaisYan BlaisVuosi sitten
  • no

    JonEilertsen (HellsatanX)JonEilertsen (HellsatanX)Vuosi sitten
  • Yes sherlock. ...that would be badass. ..

    dallaskl90dallaskl90Vuosi sitten
  • It looks fine as it is, dont hang a lot of plastic crap on it.

    grochomarx2002grochomarx2002Vuosi sitten
  • no

    diazvlogs diazdiazvlogs diazVuosi sitten
  • Porta-power !!!

    troy3518troy3518Vuosi sitten
  • Facelift it!!! The new front ends look so much better

    Tyler KinchTyler KinchVuosi sitten
  • Don’t do face lift

    BlurNinja 123BlurNinja 123Vuosi sitten
  • Porta Power

    Scott McKinnisScott McKinnisVuosi sitten
  • Seems to me if you do a little research before you start on something, you wouldn’t be chasing your tail so much, and that you would know what you are working on and working with!!, just saying.

    Michael ElkinsMichael ElkinsVuosi sitten
  • Facelift!

    Miked MediaMiked MediaVuosi sitten
  • If B is for build, Dynatrac axle swap and lever transfer case. That 6.2 sounds so sexy.

    Cole BrookingCole BrookingVuosi sitten
  • Hell yea! Facelift 👌🏼

    vidal ruizvidal ruizVuosi sitten
  • Yesss facelift, looks soo much better

    Charles MckinneyCharles MckinneyVuosi sitten
  • I don't think you should. Keep the car factory. You may sell it one day and the new owner may not know that the headlights are a 2017 and not 2014..

    EspoitisEspoitisVuosi sitten
  • B is for build favorite word: Metal. "Metal, metal, bent metal, mEtALlll" 😂

    Luis BritoLuis BritoVuosi sitten
  • 2018 is Boring keep it a 2014 and raptor line it, thats actually interesting and would be fun to watch.

    DR. DRAGONDR. DRAGONVuosi sitten
  • Oh yeah give it the full face lift an the truck will be a beast! Plus it will add value to it incase you wanted to sell it.... It'll look EVILLLLL!!!

    Ste WilkesSte WilkesVuosi sitten
  • get a bright laser pointer. no more fingers in the shot.

    Ben DinoBen DinoVuosi sitten
  • Yes full face lifed

    Florida mini bike racing LeagueFlorida mini bike racing LeagueVuosi sitten
  • Yes do it. The lights would look sick do it

    Timothy CrawfordTimothy CrawfordVuosi sitten
  • You must have printing press with hundred dollar bill plates in a back room. Either that or your girl friend is rich

    Dennis CountrymanDennis CountrymanVuosi sitten
  • Why does the quality seem terrible

    Jack GibsonJack GibsonVuosi sitten
  • If the guy parting out the 18...has the front bumper still, hmu!!

    Brian SwettBrian SwettVuosi sitten
  • Facelifted

    michael doddmichael doddVuosi sitten
  • There are plenty of quality upgraded fiberglass kits available. ABV, McNeil, etc. that will give you a "facelift" without retrofitting oem panels.

    Jared ChevrauxJared ChevrauxVuosi sitten
  • No face lift use the parts you have

    Ali JumanAli JumanVuosi sitten
  • I still wonder if the frame/ impact frame is bent; the two tubes you see the one with the hump.

    James McGuireJames McGuireVuosi sitten
  • Yessssss do it

    Justin BerryJustin BerryVuosi sitten
  • Do the face lift. You need duel exhaust ture duel

    George WallaceGeorge WallaceVuosi sitten
  • I would face lift it

    Franklin OneilFranklin OneilVuosi sitten
  • Face lift hell yea

    Kaden RogersKaden RogersVuosi sitten
  • The hoods are totally different and lights

    make America great againmake America great againVuosi sitten
  • Hell yea new sub and the bronze wit the blue looks sooooo good

    Craig VollCraig VollVuosi sitten
  • Think about going to a junkyard to cut off the frame piece for the lower control arm instead of fabricating? then just weld in. I bet the regular normal F150 frame is the same. it might be worth the junkyard entry fee to take a look at least.

    Cody RebernakCody RebernakVuosi sitten
  • No face lift, the older generations look better.

    Robert SecondiRobert SecondiVuosi sitten

    skidz 808skidz 808Vuosi sitten
  • Your Raptor is already unique. Its a worthless wrecked Raptor. 7:00 unless you want to die behind the wheel trailer it to a professional frame shop. A welder isn't a frame guy

    HighStreet KillersHighStreet KillersVuosi sitten
    • Agreed. Not being harsh but the only true way to sort this kind or problem out is new chassis. Or at least get to a junk yard n get the complete front end. Cut it well passed anything bent and get a pro to fit it. Don’t get me wrong it can be done this way. But seriously it’s not just yourself you’ve to consider! It’s your passengers and everyone else on the road. EVEN the DICKHEADS! anyway. Keep the vids coming let’s see how it goes. 👍🏻🤘🏻👌🏻

      Dave wDave wVuosi sitten
  • I like the old one! Keep it same. Just love the work you do!! Hello from India.

    P UP UVuosi sitten
  • No because the years don't match it will be a Frankenstein truck

    Ethan DobbsEthan DobbsVuosi sitten
  • That hydraulic equipment is called a Portapower

    Charles PelletierCharles PelletierVuosi sitten
  • Facelift!!

    efren santiagoefren santiagoVuosi sitten
  • I don't think it's worth the money

    roger daviesroger daviesVuosi sitten
  • Yeah! You sould do that facelift 👍🏼 it looks Killer 🤘🏼😎🤘🏼

    Robb M. CupichRobb M. CupichVuosi sitten